Manufacturing Wastewater Treatment Case Studies
Industrial Machinery Wastewater Treatment Ability Test
The sample was received with a pH of approximately 10 and was pH adjusted downward with caustic fluid. 100 ml of the sample was tested and dosed with .25 grams of Floccin™ J and provided the results as shown below; which equates to a dosage rate of 21 lbs. per 1000 gallons of wastewater.
Reaction time was 3-4 minutes with a settling time of 90-120 seconds. Suspended solids content of the untreated water is 500ppm and after treatment was less than 30ppm.
Follow the links at the left for more industrial wastewater treatment manufacturing case studies.
Download more manufacturing industry case studies here>>>
Get Started Right Away>>>
Call 1-877-965-1577
Toll Free
