Manufacturing Wastewater Treatment Case Studies
Ball Bearing Manufacturer Wastewater Treatment Test
Integrated Engineers, Inc. conducted the below treatability on a Ball Bearing
manufacturing facility wastewater sample that uses soluble machine coolants and cutting fluids in
their machining process. Below are the results.
Untreated Parameters:
- pH = 8.4
- Conductivity = 1,385 microSiemens (uS)
The treatment required no pH adjustment from the 8.4 pH. The best result was produced using 0.31 grams of Floccin™ H (granulated) in a 100 ml sample and required very little mixing. The dosage equates to a treatment of 25 lbs/1,000 gallons. The water still had a blue color probably from the dye additive in the machining coolants.
Recommended Treatment:
- Flocculation Skid
- Post-ozonation if color removal needed
Follow the links at the left for more industrial wastewater treatment manufacturing case studies.
Download more manufacturing industry case studies here>>>
Get Started Right Away>>>
Call 1-877-965-1577
Toll Free
