Industrial Waste Water Treatment Success Stories

Industrial Laundries Wastewater Treatment - Saved $80K per year

Industry Laundry Heavy Wastewater
New Treatment, Flocked left, Effluent right

This facility washes heavily soiled towels from the ink printer and furniture polishing industries. The wastewater generated is very concentrated with metals and hydrocarbons making it difficult to treat in their DAF pretreatment system. The facility was using conventional chemistry with sulfuric acid, organic/inorganic coagulant, metal precipitant, flocculant, and Harborlite (filter press precoat). The treatment was working most of the time with intermittent violations for Copper (over ppm) and Zinc (over ppm).

The sludge generated is dewatered with a plate and frame press. The precoat required 8 bags of Harborlite as a precoat otherwise the sludge would not release the entrained water or release from the plates when opened for cleaning. These 8 bags accounted for a press volume of 4 cubic feet, so the actual sludge dewatered in the 12 cubic foot press was 8 cubic feet. The facility made 3 press loads a day and filled one 20,000 lb. dumpster for haul off per week. The disposal cost per dumpster is $1,600 for a total haul off cost of $6,400/month. The average chemical cost was $11.00/1,000 gallons.

Industry Laundry Wastewater Treatment Dry Sludge with Less Precoat
Dry Sludge with Less Precoat

The facility was interested in looking at the Floccin™ products as a means to reduce costs and maintain compliance with the metal limits. Integrated Engineers formulated a special product to remove the metals and decrease the sludge generated. The result was a similar chemical cost at $11.00/1,000 gallons, reduction in metals to below discharge limits, and a reduction in sludge. The reduction in sludge generated is from having to use only 1 bag of Harborlite/press load, which allows over 11 cubic feet of press for dewatering the sludge. The facility now makes 2 press loads/day and the cake is significantly drier saving labor at 2 hours/day for the operator. The drier sludge is also lighter, so the facility can put more press loads in each disposal bin as the cost of disposal is based on the total sludge bin weight. Overall savings are in excess of $80,000/year.

To download more case studies click here>>>

Or get started right away>>>Get Started

Call 1-877-965-1577
Toll Free

Wastewater Treatment Success Stories Home

Integrated Engineers Inc Logo

Featured Case Studies

Case Studies By Industry

More Featured Case Studies

Better Business Bureau Accreditation

Call 1-877-965-1577 Toll Free

Integrated Engineers Incorporated
40308 Greenwood Way
Oakhurst, CA 93644 USA
Country Code +1
(877) 965-1577 toll free
(559) 683-8284 phone
(559) 683-8913 fax

Email us:

sales@wecleanwater.com

Check Out Our Industrial Wastewater Treatment Environmental Expert Profile

*© 2011 Copyright Integrated Engineers , Inc., all Floccin™ products and equipment designed by Integrated Engineers, Inc., disclosed herein on this website are the exclusive properties of Integrated Engineers, Inc. and shall not be copied or reproduced in whole or in part without the express written consent of Integrated Engineers, Inc.... Click Here to Read about How Integrated has saved industry millions...You may find savings too! Find out now...

Call 1-877-965-1577

 

Bookmark and Share