Wastewater Treatment Success Stories
Hazardous Oily Industrial Waste Water Treatment
The sample was received was at a pH of 6.8 and did not require any pH adjustment. 100 ml of the sample was tested and dosed with 0.4 grams of Floccin J and provided the results as shown below. The sludge was poured though a filter paper and squeezed simulating a pressing operation. The sludge dewatered well and did not have any break though (solids or particles breaking through the paper media). This sludge could easily be dewatered using a plate and frame press.
To download more case studies click here>>>
Or get started right away>>>
Call 1-877-965-1577
Toll Free
