Wastewater Treatment Batch Systems
Integrated's Manual Batch Systems for Small to Medium Facilities
The Manual Batch Systems are for wastewater flows up to 10,000 gal/day. These systems are typically used by corrugators, ink and dye manufacturers, small food processors, and other small to medium size industrial facilities.
The batch systems are based around utilization of the Floccin™ flocculating agent chemistries with its proven simplicity of treatment and drier sludge cake.
The benefit is no more chemical metering pumps and problems.
Specifications:
| Gallons/batch | Filter press size * | Budgetary Price ** |
|---|---|---|
| 500 | 2 cu ft | call |
| 1,000 | 3-4 cu ft | call |
| 1,500 | 6 cu ft | call |
| 2,500 | 8 cu ft | call |
| 5,000 | 12 cu ft | call |
| *Filter Press size is based on a suspended solids of 1,000 ppm **Pricing is dependent on site-specific needs, materials, and wastewater parameters |
||
Process Description:
Pump the wastewater from the collection sump to the EQ Tank. Transfer the wastewater, as needed, to the reaction tank; turn on the mixing motor. Add the Floccin™ material until a flock is formed (add more or less for desired water clarity). Mix for an additional 5 minutes, turn mixer off. Let settle for 30 minutes. Decant clear water on top through filter press. Dewater sludge after decant through press. Open press and remove dewatered sludge.
Options:
- Sump Pump
- pH Control
- Access Platform
- Automated Controls
- Water Reuse
Typical Batch System Installation
Results from Batch Treatment System at a corrugator with 100% water reuse.
Call 1-877-965-1577
Toll Free
