Category Archives: Floccin

Information about all the Floccin Products.

The Myriad Benefits of Floccin™

  By Integrated Engineers | October 7, 2010 - 10:09 am | Floccin, Flocculation, Green Industrial Wastewater Treatment, Industrial Wastewater Treatment, New at I.E.
Leave a comment

Industrial Wastewater Treatment Made Easy

This is an introduction to the dry granular Floccin™ product. As you will see, Floccin™ easily encapsulates various contaminates in your wastewater. These contaminates include suspended solids, organics and heavy metals.

Floccin™ operates over a wide pH range, removes more oil, grease and organics than other chemistries, separates the contaminates quickly from the waste stream, requires no additional chemistry to dewater, simplifies the operation by using just one product, and reduces overall operating costs.

Determining The True Costs of Liquid/Solids Separation

Each of these points should be used to clearly define the true operational costs of each wastewater treatment facility and the facility’s potential for cutting costs:

Click Here to Go to the Download Page and Download Your Copy

Incoming search terms:

Corrugator & Flexo Print Wastewater Treatment

  By Integrated Engineers | March 10, 2009 - 9:13 am | Floccin
Leave a comment

We deal specifically with the treatment of industrial waste waters.

Over the past several years, we made it a priority to help the Corrugating and Flexo Print industries and to convert them to using our Single Non-Hazardous wastewater treatment product.

  • Over 30 Corrugating and Flexo Print companies have converted to our Floccin waste water treatment product in the last 2 ½ years
  • Our customers have saved an average of 40% on their overall treatment costs
  • Our customers have eliminated the multitude of chemicals traditionally used; including acid and coagulants
  • Most clients reuse the treated water for starch makeup, achieving zero discharge
  • Sludge passes TCLP/STLC for non hazardous disposal
  • Part of our service is solving process + mechanical problems onsite
  • Our customers consistently meet their local wastewater discharge requirements with a lower total dissolved solids level
  • Consistently dry filter cake meeting the necessary requirements for Non-Hazardous Landfill
  • We have established great relationships with our accounts as our qualified Technicians routinely follow up with each customer individually every 6-8 weeks
  • Our response time is excellent when emergency issues arise
  • Experienced in training new wastewater operators
Treated & Treated/Filtered

Treated & Treated/Filtered

Typical Filter Press Cake

Typical Filter Press Cake

Incoming search terms:

Super Sack Floccin Feeder

  By Integrated Engineers | March 4, 2009 - 3:30 pm | Floccin
Leave a comment

General Specifications:

These units are epoxy painted carbon steel construction with an integrated feed hopper equipped with a deck capable of supporting a 2000 lb Floccin™ SuperSack. There is a visible access door to allow opening of the SuperSack while mounted on the Floccin Feeder. Dimensions are approximately 26” wide x 61” high (overall footprint 42” X 42”) with a 1/4 HP, 90 volt DC motor. The electrical service requirement is 4 amps at 110 volts single phase. On/Off and variable signal inputs are available in the controller. The feeder is capable of delivering the FloccinAgents to a vertical height of 35 ft.

Controller Specifications:

The control panel is equipped with a digital counter / rate meter to allow for precise Floccin delivery rates. It can be set for either automatic operation or run manually for override /  setup situations. Emergency Stop function is also provided. The Floccin delivery rate is adjustable through the use of a potentiometer. When configured for a batch process, the controller will feed a user-preset amount of Floccin. After reaching its setpoint, it will turn off. The display values are pounds of Floccin. When configured for continuous flow operation, the feeder will display the rate of Floccin being fed in either pounds per minute or pounds per hour. All operations can be manually triggered, or interfaced with existing equipment for automatic operation.

Blue Super Sack Floccin Feeder

Blue Super Sack Floccin Feeder

Incoming search terms:

Commercial Auger Feeder (60 Gallon)

  By Integrated Engineers | March 3, 2009 - 3:19 pm | Floccin
1 Comment

General Specifications:
These units are epoxy coated carbon steel construction with a heavy gauge polypropylene 60gallon feed hopper. Dimensions are approximately 24” wide x 36” heighth. 1/20 HP, 90 volt DC motor. The electrical service requirements are 2 amps at 110 volts single phase. On/Off and variable signal inputs are available in controller. Feeder is capable of feeding the FloccinAgents™ to a vertical height of 16 ft.

Controller Specifications:
Standard Continuous Unit are set with potentiometers for motor speed to deliver a continuous amount of material. Manually turned On/Off or may be interfaced to customer’s existing
controls. Has adjustable On/Off delay relay to allow controlled on/off cycling.60 Gal With Auger